行业动态
产品
联系嘉瑞杰
山东嘉瑞杰机械科技有限公司
联系人：王经理
电话：0531-88670722
手机 : 15866677695
地址：济南市天桥区梓东大道鑫茂科技城143号楼102室
为什么要进行手板打磨？
来源：http://www.axcwv.cn作者：山东嘉瑞杰机械科技有限公司发布时间：2022-10-04
手板模型要想做到跟成品接近，达到查验出外观的效果，就须制作一个手板模型。手板模型做好之后，首要就需要手板打磨，那么为什么要进行手板打磨呢？
If the prototype wants to be close to the finished product and achieve the effect of checking the appearance, it is necessary to make a prototype. After the prototype is completed, the first thing to do is to polish the prototype. So why should we polish the prototype?
济南手板打磨便是底材外表上的毛刺，油污灰尘，降低工件外表的粗糙度，对旧漆层进行打磨后，还可增强涂层的附着力等等。手板打磨能够分为传统手工打磨和现代打磨。
Jinan hand sanding is to remove burrs and oil dust on the surface of the substrate, reduce the roughness of the surface of the workpiece, and enhance the adhesion of the coating after polishing the old paint layer. Manual grinding can be divided into traditional manual grinding and modern grinding.
由于一个手板零件在CNC加工后，它的表层无可避免的会发生许多的毛边和刀痕。此刻就需要人为的手工进行处理这些问题。一般我们会选择砂纸进行打磨，或进行抛光。
Since a hand made part is processed by CNC, many burrs and knife marks will inevitably occur on its surface. At this moment, people need to handle these problems manually. Generally, we will choose sandpaper for polishing or polishing.
常有的外观处理有打磨，喷沙，抛光，上色，丝印，电镀。手板打磨的工艺办法一般能够分：
Common appearance treatment includes polishing, sand blasting, polishing, coloring, silk screen printing and electroplating. Generally, the process methods of manual polishing can be divided into:
1.机械打磨：大面积施工时，为了进步工作效率。
1. Mechanical grinding: in order to improve the working efficiency during large-scale construction.
2.干打磨：采用砂纸进行打磨。进程中将发生许多粉尘，影响环境卫生。
2. Dry grinding: sand paper is used for grinding. A lot of dust will occur in the process, which will affect the environmental health.
3.湿打磨：用水砂纸蘸水或肥皂水打磨。水磨能削减磨痕，进步平滑度，并且省砂纸、省力。
3. Wet grinding: sand paper dipped in water or soapy water for grinding. Water grinding can reduce wear marks, improve smoothness, and save sandpaper and labor.
4.还有一种特殊的打磨办法：“轻磨”，此刻应选用较细砂纸及熟手进行。
4. There is also a special grinding method: "light grinding", which should be carried out with fine sandpaper and skilled hands.
打磨的时分应该注意到问题，首要是需要粗打磨，去掉外表毛刺之后再进行细打磨，终根据产品对外表的要求进行打磨！
Attention should be paid to the problems when grinding. First, rough grinding is required. After removing the external burrs, fine grinding is carried out. Finally, grinding is carried out according to the product's requirements for the external appearance!
一次打磨完毕之后，通过喷上一层原子灰，能够将产品外表的粗糙程度进行放大，肉眼能够看到瑕疵的程度。终部分批改，直到一件产品终完成打磨进程。更多相关内容就来我们网站http://www.axcwv.cn咨询吧！
After one polishing, the roughness of the product surface can be magnified by spraying a layer of putty, and the degree of defects can be seen by the naked eye. The final part shall be corrected until a product is finally polished. More relevant content will come to our website http://www.axcwv.cn Consult!
上一篇：手板模型的分类、作用以及作用
下一篇：制造手板模型需求留意什么
相关资讯
手板制作加工时注意事项
2024-04-11手板加工如何服务好客户?
2024-04-09手板加工的过程及方式
2024-04-06快速成型的基本原理构成有哪些？
2024-02-27工业产品设计中常见手板件的制作方式
2024-02-23ABS手板模型的优势有哪些？
2024-02-21铝合金手板模型制作手法与维护
2024-02-10铝合金手板模型的氧化工艺介绍
2024-02-10汽车手板模型制作的低压灌注工艺
2024-02-06手把手教你怎么选机箱机柜定制工厂
2024-01-27
