对于一些大型医疗机箱比一般的设备要贵一点，其体积很大的。一旦出现问题的话，其在维修起来也是很费事的。所以我们要做好保养是很重要的呢。但是如果出现一些问题的话，也是不要紧的，下面济南机箱外壳厂家小编就简单为大家介绍一下。

For some large medical cases, they are a bit more expensive than ordinary devices and have a large volume. Once a problem occurs, it is also very difficult to repair. So it's important for us to do a good job of maintenance. But if there are any problems, it's not important. Below, the editor from Jinan chassis shell manufacturer will briefly introduce them to you.

1、一般普通的设备，要随坏随修。总结几年来的医疗器械加工与修补实践，在接到仪器后，先剖析缺点现象，判定缺点来历，然后选用必定查验方法，逐级剖析查验，判定缺点元件的修补或替换。

1. Ordinary equipment should be repaired as needed. Summarize the practice of medical device processing and repair over the past few years. After receiving the instrument, first analyze the defect phenomenon, determine the origin of the defect, and then select a certain inspection method to analyze and inspect step by step, and determine the repair or replacement of defective components.

2、一般其急救设备，有必要急修，活络清扫缺点。由于各抢救设备利用率不高，放置时间长，选用保养修补的方法，守时检查。由于各科室的急救设备，没有专人保养，在有患者需求抢救时，仪器常常运用不灵。

2. Generally, its first aid equipment requires urgent repair and active cleaning. Due to the low utilization rate and long storage time of various rescue equipment, maintenance and repair methods were chosen, and timely inspections were carried out. Due to the lack of dedicated personnel to maintain the emergency equipment in various departments, the instruments often fail to function properly when patients need to be rescued.

一方面，由于仪器不常运用，长期堆集尘土，构成线路短路而损坏。另一方面，运用人员的操作失误构成机器缺点。因此，除了守时检查外，各科室的抢救设备有必要有专人保养。

On the one hand, due to the infrequent use of instruments, dust accumulates for a long time, resulting in circuit short circuits and damage. On the other hand, operational errors by operators constitute machine defects. Therefore, in addition to punctual inspections, it is necessary to have dedicated personnel maintain the rescue equipment in each department.

3、一般其大型医疗机箱设备 ，有必要选用预防性的修补方法。即对仪器设备进行正常的保养，才调运用更耐久，这就要求医疗器械加工与修补的作业人员应按方案守时或不守时地对设备进行必要的查验，调整加油，替换易损元件等保护作业。以避免设备因部分小缺点损坏更名贵的部件。

3. Generally, it is necessary to choose preventive repair methods for large medical chassis equipment. Only by performing normal maintenance on instruments and equipment can they be adjusted for more durable use. This requires medical device processing and repair operators to conduct necessary inspections, adjustments, refueling, replacement of vulnerable components, and other protective operations according to the plan on time or not. To avoid equipment damage to more expensive components due to some minor defects.

4、一般其高危设备，即高风险设备，有必要对医疗器械加工操作人员进行操练查核，严峻按操作规程操作，有必要检查现在状况是否作业正常，要有专人处理。

4. Generally, for high-risk equipment, that is, high-risk equipment, it is necessary to conduct training and inspection on medical device processing operators, strictly follow operating procedures, and check whether the current condition is normal. It is necessary to have a dedicated person handle it.

对于一些大型医疗机箱外壳维护和保养相关事项就讲解到这里了，希望能够给您好的帮助，更多事项就来我们网站http://www.axcwv.cn咨询！

That's all for the maintenance and upkeep of some large medical chassis casings. I hope it can be helpful to you. For more information, please come to our website http://www.axcwv.cn consulting service